In the last Mishnah, we spoke about an oven that was cut up and then put back together. Here, we’ll talk about an oven that was made in sections and meant to be assembled into an oven. It had to be put together. The Mishnah says: An oven that comes from a craftsman’s house is cut into sections. It is manufactured and needs to be put together. The craftsmen made hoops that hold it in place and form it into an oven. The oven has panels that are fitted together into a round oven by these different hoops. They’re held together and placed around the outside. Think of a wine barrel. A wine barrel is made of wood, and it’s held together by metal hoops that go around it. Here, the hoops around the oven were made of earthenware. So the earthenware hoops that go around it keep it in place and keep the sections together.
Ve-natan alav. And the owner puts the hoops around the sections and forms them into an oven. Ve-hu tahor (pure). Even though the oven that was formed was tahor, it was unable to become tameh (impure) before the hoops were placed onto them. Nitma. Now that the hoops are put onto them, it’s considered complete. It could become tameh. These sections are tightly held together by these hoops, and they’re considered attached to each other, forming a real oven. Silek et limudav, tahor. If the owner then takes away these hoops, the oven becomes tahor because the sections are not connected to each other, and now they’re considered like a broken oven. At this point, if the oven became tameh while the sections were attached, it becomes tahor, like a broken oven. It’s like a broken oven, and it’s fully pure. If he puts them back together, the oven is still tahor. That’s the chidush (novel insight). It’s unable to become tameh going forward because it was previously used and heated.
The sections cannot be put back together. They can’t be fitted together again using these hoops. An oven that was used for baking when it has the hoops becomes warped; it becomes shaped a certain way, and once you unseal it and remove the hoops, you can never put it back together again. There are gaps that will allow the heat to escape, so it’s considered broken forever, and therefore it cannot become tameh. But Meracho ba-tit: if he puts the hoops back on and then spreads clay over them. After he took it off the first time, he puts it back on, which, as we said, is not going to turn it back into an oven. But here he adds another layer. He puts clay over it. It’s able to become tameh because the clay will cover up those holes between the sections and make the oven whole once again. You don’t have to cover the entire thing, just the spaces between the sections. Ve-eino tzarich lehasiko. You don't have to heat the oven again to make it fit to become like you would have to be with a new oven. She-kvar husak. Because the oven was already heated once the owner made it originally, before he removed the hoops. It was already heated. When the owner originally assembled it, he heated it to the required temperature. Otherwise, it would never have had the ability to become tameh.
So that heating is effective even after he removes the hoops and puts them back together. Even though we learned in the last Mishnah that we had a cut-up oven, and you reassemble it and put clay on it, it does not become tameh until it’s heated to the right temperature. In our case, we’d say it’s different. In that last Mishnah, the only thing holding the pieces together was the coating of clay. So the oven has to be heated again to bond the clay and make sure that the oven is actually strong enough to create attachment. But here in this Mishnah, the hoops are holding things together. Therefore, the new clay being added is not a binder between the different pieces. It’s only there to cover the holes. So you don’t need the heating in order to bond things together. The hoops are doing it, but they’re deficient, and you need a little clay to support it. So there’s no need to bond things together, which is what the heating would normally do. It’s already connected. You just need a little support. And therefore, there’s no need to reheat it in order to turn it into a proper oven.

